• Table of Content
• Foreword
• Scope
• Uncertainty
• Analytical Measurement
• The Process
• Step 1: Specification
• Step 2: Identification
• Step 3: Quantification
• Step 4: Calculation
• Reporting Uncertainty
• Appendix A: Examples
  • Example 1: Calibration Standard
  • Example 2: Standardising NaOH
  • Example 3: An Acid/Base Titration
  • Example 4: In-house Validation Studies
  • Example 5: Determ. Cadmium Release
  • Example 6: Crude Fibre in Animal Feed
  • Example 7: Lead in Water - double IDMS
• Appendix B: Definitions
• Appendix C: Analytical Proc.
• Appendix D: Analyse U Sources
• Appendix E: Statistics
• Appendix F: MU at the Limit
• Appendix G: Common Sources
• Appendix H: Bibliography

Appendix H: Bibliography

H.1. ISO/IEC 17025:1999. General Requirements for the Competence of Calibration and Testing Laboratories. ISO, Geneva (1999)

H.2. Guide To The Expression Of Uncertainty In Measurement. ISO, Geneva, Switzerland 1993. (ISBN 92-67-10188-9)

H.3. EURACHEM, Quantifying Uncertainty in Analytical Measurement. Laboratory of the Government Chemist, London 1995. ISBN 0-948926-08-2

H.4. International Vocabulary of basic and general standard terms in Metrology. ISO, Geneva, Switzerland 1993 (ISBN 92-67-10175-1)

H.5. ISO 3534:1993. Statistics - Vocabulary and Symbols. ISO, Geneva, Switzerland 1993

H.6. Analytical Methods Committee, Analyst (London). Jan 1995; 120(1): 29-34

H.7. EURACHEM, The Fitness for Purpose of Analytical Methods. 1998 (ISBN 0-948926-12-0)

H.8. ISO/IEC Guide 33:1989, "Uses of Certified Reference Materials". ISO, Geneva 1989

H.9. I.J.Good, "Degree of Belief" 1982, in Encyclopaedia of Statistical Sciences, Vol. 2, Wiley, New York

H.10. International Union of Pure and Applied Chemistry. Pure Applied Chem. (1999)

H.11. J. Kragten, "Calculating standard deviations and confidence intervals with a universally applicable spreadsheet technique", Analyst, 119, 2161-2166 (1994)

H.12. British Standard BS 6748:1986. Limits of metal release from ceramic ware, glassware, glass ceramic ware and vitreous enamel ware.

H.13. S L R Ellison, V Barwick. Accred. Qual. Assur. (1998) 3 101-105.

H.14. ISO 9004-4:1993, Total Quality Management. Part 2. Guidelines for quality improvement, (ISO 1993)

H.15. H. Kaiser, Anal. Chem. 42 (1970) 24A.

H.16. L.A. Currie, Anal. Chem. 40 (1968) 583.

H.17. IUPAC Limit of Detection, Spectrochim. Acta 33B (1978) 242.

H.18. OIML Recommendations IR 33 Conventional value of the result of weighing in air.